Summer is when heat pumps switch to cooling, and when a unit that struggled through winter gets its second workout. Late spring is the easiest time to get one serviced before the hot weeks.
In this post · 6 sections
The power bill arrives and someone blames the heat pump. Sometimes that's fair. But more often the unit is doing exactly what it was told, in conditions that make it work far harder than it needs to. A few checks will usually tell you which it is.
The filter nobody cleans
Inside the indoor unit are filters that catch dust. When they clog, airflow drops and the unit runs longer to do the same job. Most can be slid out, vacuumed or rinsed, dried and put back. The manual tells you how, and it's a five-minute job most people never do.
The outdoor unit matters too. Plants, leaves and junk stacked around it choke the airflow. Give it clear space on all sides.
Settings that cost money
- Very low cooling or very high heating targets make the unit run flat out without making you more comfortable.
- Turning it on and off constantly can use more power than leaving it at a sensible setting while you're home.
- Auto mode can switch between heating and cooling in mild weather. Pick the mode you actually want.
- Cooling a room with the curtains open to afternoon sun is fighting a losing battle.
When it's the unit, not you
Signs it needs a technician: ice on the outdoor unit in cooling mode, water leaking from the indoor unit, strange smells, grinding or rattling, or it simply doesn't reach the temperature it used to. A professional service cleans the coils and drain, checks the refrigerant system and electrical connections, and can spot problems before they become expensive.
Heat pump servicing is often done by specialist heat pump technicians, some of whom are also electricians. The refrigerant work needs the right certification, so ask about it.
Is it the right size?
A heat pump too small for the space runs constantly and never quite gets there. Too big, and it cycles on and off. If you've extended or opened up a living area since it was installed, it may no longer suit the room.
What it costs
Kettle's cost guide for electricians puts rates at $70 to $120 an hour, with an ordinary job running from about $150 to $800, typically around $350. A straightforward service or a fault find on one unit sits towards the bottom of that range; parts and refrigerant work push it up.
What to send so it's quick to quote
- The make and model, from the sticker on the indoor or outdoor unit.
- How old it is, roughly.
- What's wrong: noise, leak, not cooling, high bills.
- When it was last serviced, if ever.
- Where the outdoor unit is and how easy it is to reach.
The takeawayClean the filters, clear the outdoor unit and pick sensible settings before you blame the heat pump. If it still struggles, a service usually costs less than a summer of high bills.
Customers who post on Kettle get quotes from local businesses, and the ones that reply first with a clear price tend to get the job.
Questions people ask
How often should a heat pump be serviced?
Many manufacturers recommend regular professional servicing, and cleaning the filters yourself every few weeks during heavy use. Check your manual for its schedule.
Is it cheaper to leave a heat pump on all day?
Not always. Leaving it at a sensible setting while you are home can be more efficient than switching it on and off, but running it in an empty house costs money.
Why is my heat pump leaking water inside?
Often a blocked drain line or dirty coil. It needs a technician to clean and check it.